pcb piezotronics
back home our products contact us offices about pcb site map tech support

New Products

740B02 Dynamic ICP® Piezoelectic Strain Sensor

The extraordinary resolution, high sensitivity and fast response make the Model 740B02 ideal for the measurement of dynamic strain. The sensor integrates a proprietary quartz sensing element and built-in microelectonic circuitry within a low-profile titanium housing. The strain sensor provides a resolution of 0.0006 µe over a 0.5 to 100,000 Hz bandwidth. It is compatible with PCB's ICP® sensor signal conditioners and is capable of driving long cables. Typical applications include: active vibration control, noise-path analysis, and modal testing, as well as use on aircraft and marine hulls, composite materials, "smart structures", and vibrating machinery.


PFS Division:
260A11 Three Component, Sz = 15 pC/lb; Fz = 1000 lbs
 
SVS Division:
357C10 Miniature Charge Output Accelerometer
338B Series Low Profile Accelerometers
 
DCS Division:
3701D2FA20G Low-Voltage Capacitive 100 mV/g Accelerometer
3701D3FA20G Capacitive, 100 mV/g, 0-300 Hz, 15 gm
3701G3FA3G Capacitive, 1 V/g, 0-100 Hz, 11 gm
 
IMI Division:
086C41 Modally Tuned® Impact Hammer
369A40 Miniature, High-Frequency Industrial Accelerometer
603A01 Low-Cost, High-Frequency Industrial Accelerometer
680A01 Battery Powered Signal Conditioner
 
GEP Division:
445A01 Capacitive Sensor Signal Conditioner
443A01 Dual-Mode Vibration Amplifier
481A02 Multichannel Sensor Signal Conditioner
482A21 and 482A22 Low-Noise Signal Conditioners
442A02 ICP® Sensor Signal Conditioner, 1 Ch. w/Gain
442A06 ICP® Sensor Signal Conditioner, 1 Ch. AC/DC
442A04 ICP® Sensor Signal Conditioner, 4 Ch.
 
AVC Division:
740B02 Dynamic ICP® Piezoelectric Strain Sensor
  Stock Product

Model: 740B02 Dynamic ICP® Piezoelectric Strain Sensor
Sensitivity (±20 %) 50 mV/µe
Amplitude Range 100 peak/µe
Broadband Resolution (1 Hz to 10 kHz) 0.6 ne
Frequency Range 0.5 to 100 000 Hz
Operating Temperature Range -65 to +250 °F (-53 to +121 °C)
Output Bias 9 to 13 VDC
Cable Integral Coaxial, 10 ft (3m) Length Supplied
Weight 0.02 oz (0,5 grams)
Size (Width x Length x Height) 0.2 x 0.6 x 0.07 inches (5,1 x 15,2 x 1,8 mm)
Electrical Connector 10-32 Coaxial

[Home] [Products] [Contact] [Offices & Distributors] [About PCB] [Site Map] [Tech Support] [Feedback]